Bollé Tryon Safety Glasses

Description

• Polarized version repel heat and water.
• Bi-material temples for better comfort.
• Flex 160° temples to adapt to all heads and reduce pressure points.
• Medium Impact Resistance – Resists a 6mm, 0.86g ball at 45 m/s.
• Range of luminous transmittance 80-100% (Clear).
• Range of luminous transmittance 43–88% (Copper).
• Range of luminous transmittance 8–18% (Smoke and Polarized).

THE REFERENCE STANDARD

AS/NZS 1337.1:2010 Australia/New Zealand standard for personal eye and face protection for occupational applications. The AS/NZS 1337.1:2010 standard specifies minimum requirements for non-prescription eye and face protectors and associated oculars.

Standard AS/NZS 1337.1:2010 also defines the basic characteristics to which all eye protection must conform with regard to: eyewear coverage, optical quality and minimum strength.

While all eye protection must comply with AS/NZS 1337.1:2010, all filters and equipment are also covered by specific standards which must be understood in order to ensure protective equipment is adapted to the activity of its wearer.

The AS/NZS 1337.1:2010 standard applies to all eye protection and guarantees adequate marking and the quality of the equipment. Its purpose is to guarantee protection from:

• Impacts characterised by varying degrees of severity.
• Flying particles and fragments.
•  Dust.
•  Splashing materials.
•  Molten metals.
•  Harmful gases.
•  Vapours and aerosols.
•  Or from any combination of these risks.

Bollé Safety designs and markets personal protective equipment for eye protection for industrial use consistent with the AS/NZS 1337.1:2010 standards. Each marking corresponds to a very specific use. All Bollé Safety products are tested at 23ºC and 60º C according to AS/NZS 1337.1:2010 standard. Tested by independent laboratories, certified by accredited bodies (BSI, SAI, Global and others), this information guarantees protective eyewear quality and resistance.

Bollé Safety strives to develop and provide high quality products with emphasis on health and safety of the customers. All Bollé Safety products are tested and approved to AS/NZS 1337.1:2010 for Medium Impact Protection.

Looking to know more about Bollé?

Looking to know more about Tryon?